Author Topic: RF Applications  (Read 4224 times)

itadmin

  • Forum Admin
  • Administrator
  • Newbie
  • *****
  • Posts: 9
    • View Profile
    • http://www.intellitrack.net
RF Applications
« on: February 23, 2006, 11:17:19 am »
How do I run an Intellitrack RF application on a PPC or CE device?
 

itadmin

  • Forum Admin
  • Administrator
  • Newbie
  • *****
  • Posts: 9
    • View Profile
    • http://www.intellitrack.net
Re: RF Applications
« Reply #1 on: February 23, 2006, 11:17:55 am »
Intellitrack RF applications for DMS and WMS support CE and PPC devices that have Telnet clients loaded on them.  Consult your hardware manufacturer or reseller to confirm your device has a Telnet client available.  Most Telnet Clients support the following configuration options but confirm Telnet device with your supplier before purchase.  Once you have a Telnet client, configure it for the following options (your Telnet client software may provide specific instructions on managing these settings):
   *Use VT220 Emulation
   *Use Line Mode
   *Local Echo is ON
   *Create/map  a Key Macro for  the ?ESC?  key
   *Create/map a Key Macro for the ?F5? key
   *On startup of your Telet Session type ?StartRFS? to connect to your RF application. If possible configure your Telet client to send this command automatically as soon as it connects to your host.
A full configuration guide can be downloaded from here: ftp://ftp.intellitrack.net/PUBLIC/Manuals/RF_TermEm_RevA.1.pdf